EN 13180 Certified Manufacturerمصنع معتمد وفق EN 13180

Precision‑Engineered Flexible Air Ducts Built for Industrial Airflow تصنيع دكت مرن هندسي دقيق مبني لتحمل ضغط الهواء الصناعي

MADAR manufactures fully flexible, laminated aluminum HVAC ducts — insulated and uninsulated — engineered from multi-layer aluminum/polyester laminate encapsulating a high tensile steel wire helix. Zero toxic emission, self‑extinguishing, made in Egypt. تنتج مدار دكتات هواء مرنة بالكامل من طبقات الألومنيوم والبوليستر الملفوفة حول سلك فولاذي عالي الشد، متوفرة معزولة وغير معزولة، بدون انبعاثات سامة وذاتية الإخماد، صناعة مصرية 100%.

Ø4"–20"Diameter Rangeمدى الأقطار
140°CMax Operating Tempأقصى درجة تشغيل
99.9%Antimicrobialمضاد للميكروبات
Madar Flexible Aluminum HVAC Air Duct Packaging and Ductwork
EN 13180 Standardمعيار EN 13180
TSE Approvedمعتمد TSE
ISO 9001 · 14001 · 45001أيزو 9001 · 14001 · 45001
99.9% Antimicrobialمضاد للميكروبات 99.9%
Made in Egyptصنع في مصر
Insulated Flexible Air Duct Layers with Glass Wool Thermal Insulation

Engineered for low- and high-pressure HVAC systems

مصمم لأنظمة التكييف منخفضة وعالية الضغط

Who We Areمن نحن

Manufacturing Reliable Airflow Since Day Oneنصنع تدفق هواء موثوق منذ اليوم الأول

MADAR Standard ducts are fully flexible, lightweight, laminated ducts suitable for low- and high-pressure systems. They consist of several layers of aluminum and polyester laminates encapsulating a high tensile steel wire helix, easily installed over round or oval connections. At high temperature, or in case of fire, no toxic or gas emission is produced. دكتات مدار القياسية مرنة بالكامل وخفيفة الوزن ومصفحة، مناسبة لأنظمة الضغط المنخفض والعالي. تتكون من عدة طبقات من الألومنيوم والبوليستر الملفوفة حول سلك فولاذي عالي الشد، ويسهل تركيبها على الوصلات الدائرية أو البيضاوية. عند درجات الحرارة العالية أو في حالة الحريق، لا ينتج عنها أي انبعاثات سامة أو غازية.

  • Sandwich-Laminate Constructionتصنيع بطبقات سندوتش

    4-ply aluminum/polyester laminates fully overlapping and encapsulating a high tensile steel wire, adhered with fire retardant thermosetting adhesive.

    4 طبقات من الألومنيوم/البوليستر متداخلة بالكامل وملفوفة حول سلك فولاذي عالي الشد، مثبتة بمادة لاصقة حرارية مقاومة للحريق.

  • Difficult to Igniteصعب الاشتعال

    Self-extinguishing components, max flame spread 25, max smoke developed 50, operating range −30°C to +140°C.

    مكونات ذاتية الإخماد، أقصى انتشار للهب 25، أقصى دخان متولد 50، ونطاق تشغيل من -30°م إلى +140°م.

  • Chemically Resistantمقاوم كيميائياً

    Good resistance to solvents, unaffected by humidity, moderate resistance to acid and base, hypoallergenic.

    مقاومة جيدة للمذيبات، غير متأثر بالرطوبة، ومقاومة معتدلة للأحماض والقواعد، ولا يسبب الحساسية.

Product Rangeتشكيلة المنتجات

Insulated & Uninsulated Flexible Ductsدكتات مرنة معزولة وغير معزولة

Two engineered product lines to match every thermal and pressure requirement across HVAC installations.خطا إنتاج مصممين هندسياً لتلبية كل متطلبات الحرارة والضغط في تركيبات التكييف.

Uninsulated Flexible Ductدكت مرن غير معزول

Ø4"–20"من 4 إلى 20 بوصة EN 1318010m / box10 متر / كرتونة

Standard fully flexible, lightweight, laminated ducts for low- and high-pressure systems, easily installed on round or oval connections.

دكتات قياسية مرنة بالكامل وخفيفة الوزن ومصفحة لأنظمة الضغط المنخفض والعالي، سهلة التركيب على الوصلات الدائرية أو البيضاوية.

  • 4-ply aluminum/polyester sandwich laminate4 طبقات ألومنيوم/بوليستر سندوتش
  • SAE 1070 high tensile steel wire helix (1700 MPa)سلك فولاذي SAE 1070 عالي الشد (1700 ميجا باسكال)
  • Working pressure up to 3000 Paضغط تشغيل يصل إلى 3000 باسكال
  • Resistant to stretching and impactمقاوم للتمدد والصدمات
View Full Specsعرض المواصفات الكاملة

Insulated Flexible Ductدكت مرن معزول

R-4.2 to R-8من R-4.2 إلى R-8 Glass / Fiber Woolصوف زجاجي / فايبر

The same certified aluminum/polyester core wrapped with a thermal insulation layer and vapor barrier jacket for heated or cooled air distribution.

نفس القلب المعتمد من الألومنيوم/البوليستر ملفوف بطبقة عزل حراري وغلاف حاجز للبخار لتوزيع الهواء الساخن أو المبرد.

  • Standard: 25mm glass wool (R-4.2)قياسي: صوف زجاجي 25 مم (R-4.2)
  • Optional: 40mm (R-6) or 50mm (R-8)اختياري: 40 مم (R-6) أو 50 مم (R-8)
  • Fiber wool available on demandصوف فايبر متاح حسب الطلب
  • Minimizes thermal loss & prevents condensationيقلل الفقد الحراري ويمنع التكثف
View Full Specsعرض المواصفات الكاملة
Where It Worksمجالات الاستخدام

Built for Every HVAC Applicationمصمم لكل تطبيقات التكييف والتهوية

MADAR flexible ducts are used in heating, ventilation, and air conditioning (HVAC) systems to deliver and remove air.تُستخدم دكتات مدار المرنة في أنظمة التدفئة والتهوية وتكييف الهواء لتوصيل الهواء وسحبه.

Air Conditioningتكييف الهواء
Factory Equipmentمعدات المصانع
Vehicle Constructionصناعة المركبات
Bathroom Ventilationتهوية الحمامات
Tumbler Dryerمجفف الملابس
Water Heaterسخان المياه
Confined Spaceالأماكن الضيقة
Range Hoodشفاط المطبخ
Industrial Fannerمراوح صناعية
Technical Datasheetالنشرة الفنية

Properties & Specificationsالخصائص والمواصفات

Full technical properties of MADAR flexible aluminum ducts, tested and rated for industrial HVAC performance.جميع الخصائص الفنية لدكتات مدار المرنة المصنوعة من الألومنيوم، مختبرة ومصنفة لأداء التكييف الصناعي.

Propertyالخاصية Resultالنتيجة Notesملاحظات
Diameter Rangeمدى الأقطارØ 4" – Ø 20"
MaterialالخامةAluminum + Polyesterألومنيوم + بوليسترAbility to produce (Metalized)إمكانية الإنتاج (مغطى معدنياً)
Duct Constructionتركيب الدكت4-ply Alum foil/polyester sandwich laminate encapsulating a high tensile steel wire, adhered with fire retardant thermosetting adhesive4 طبقات رقائق ألومنيوم/بوليستر سندوتش ملفوفة حول سلك فولاذي عالي الشد، مثبتة بلاصق حراري مقاوم للحريق
ImpactالصدماتResistant to stretching and impactمقاوم للتمدد والصدمات
Surface Burning Characteristicsخصائص احتراق السطحSelf-extinguishing, will not support flame. Max flame spread: 25. Max smoke developed: 50ذاتي الإخماد ولا يدعم اللهب. أقصى انتشار للهب: 25. أقصى دخان متولد: 50
Flame Resistanceمقاومة اللهب-30°C / 80°C
Reaction to Fireالتفاعل مع الحريقDifficult to igniteصعب الاشتعال
Maximum Air Velocityأقصى سرعة هواء30 m/s
Maximum Operating Pressureأقصى ضغط تشغيل2,500 Pa
Working Pressureضغط التشغيلMax. 300mm WG (3000 Pa / 10-inch WG)
Temperature Rangeمدى درجة الحرارة-30°C to +140°C
Wiring Standardمعيار السلكSAE 1070 High Carbon Steel Spring Wire, Tensile Strength 1700 MPaسلك زنبركي فولاذي عالي الكربون SAE 1070، مقاومة شد 1700 ميجا باسكال
Hygienicصحي99.9% antimicrobial propertiesخصائص مضادة للميكروبات بنسبة 99.9%
EnvironmentalبيئيEnvironmentally friendly productمنتج صديق للبيئة
Chemical Resistanceالمقاومة الكيميائيةGood resistance to solvents; unaffected by humidity; no allergic effects; moderate acid & base resistanceمقاومة جيدة للمذيبات، غير متأثر بالرطوبة، لا يسبب حساسية، ومقاومة معتدلة للأحماض والقواعد
Standard Colorاللون القياسيAluminumلون الألومنيومAbility to produce any color on requestإمكانية إنتاج أي لون حسب الطلب
Standard Lengthالطول القياسي10 m / boxVaries according to customer demandيختلف حسب طلب العميل
InsulationالعزلStandard: 25mm glass wool (R-4.2). Optional 40mm (R-6), 50mm (R-8) or fiber woolقياسي: صوف زجاجي 25 مم (R-4.2). اختياري 40 مم (R-6)، 50 مم (R-8) أو صوف فايبرAccording to customer demandحسب طلب العميل
Installation Guidanceإرشادات التركيب

Mechanical & Technical Dataالبيانات الميكانيكية والفنية

Correct bending radius and support spacing are critical to preserving airflow efficiency and duct lifespan.نصف قطر الانحناء الصحيح ومسافات التثبيت المناسبة أساسية للحفاظ على كفاءة تدفق الهواء وعمر الدكت.

Minimum Bending Radiusأقل نصف قطر انحناء

0.58 × Ø — Minimum permissible radii are generally recommended by the manufacturer. It is always advisable to make any bend radius as large as possible to reduce unfavorable pressure losses.0.58 × القطر — يوصى عمومًا بأقل نصف قطر مسموح به من الشركة المصنعة. يُنصح دائمًا بجعل نصف قطر الانحناء أكبر ما يمكن لتقليل فقد الضغط غير المرغوب.

D D R Figure 1 — Single Bend Radiusشكل 1 - نصف قطر الانحناء المفرد
1xD 1xD D Figure 2 — Double Bend (min R=2×D)شكل 2 - انحناء مزدوج (أقل نصف قطر = 2×القطر)
  • 1
    Working Pressureضغط التشغيل

    Max. 300mm WG (3000 Pa or 10-inch WG) for the full duct system.

    حد أقصى 300 مم عمود مائي (3000 باسكال أو 10 بوصة عمود مائي) للنظام بالكامل.

  • 2
    Bend Radius Ruleقاعدة نصف قطر الانحناء

    R = D for metal-based products. R = 0.8 × D for aluminum and plastic-based products.

    R = D للمنتجات المعدنية. R = 0.8 × D لمنتجات الألومنيوم والبلاستيك.

  • 3
    Double Bendsالانحناءات المزدوجة

    Should be avoided; if unavoidable, ensure each radius is not less than R = 2 × D.

    يجب تجنبها؛ وإذا تعذر ذلك، يجب ألا يقل كل نصف قطر عن R = 2 × القطر.

  • 4
    C-Straps & Hanging Supportأحزمة التعليق والدعم

    Hanging straps should support at least half the circumference surface in contact, without reducing the effective inside diameter. Minimum strap width: 25mm.

    يجب أن تدعم أحزمة التعليق نصف محيط الدكت على الأقل عند التلامس، دون تقليل القطر الداخلي الفعّال. أقل عرض للحزام: 25 مم.

Quality Assuranceضمان الجودة

Certified to International Standardsمعتمد وفق المعايير الدولية

ISO
9001
Quality Managementإدارة الجودة

Certified quality management system

نظام إدارة جودة معتمد

ISO
14001
Environmentalالإدارة البيئية

Environmental management standard

معيار الإدارة البيئية

ISO
45001
Health & Safetyالصحة والسلامة

Occupational health and safety

الصحة والسلامة المهنية

EN
13180
Product Standardمعيار المنتج

European standard for flexible ducts

المعيار الأوروبي للدكتات المرنة

TSE
Turkish Standardالمعيار التركي

Approved by Turkish Standards Institute

معتمد من معهد المعايير التركي

Get In Touchتواصل معنا

Request a Quote or Technical Consultationاطلب عرض سعر أو استشارة فنية

Our engineering team responds within one business day.يرد فريقنا الهندسي خلال يوم عمل واحد.

Addressالعنوان

Qanater Road, Cairo, Egypt

طريق القناطر - القاهرة - مصر

Phone & WhatsAppالهاتف والواتساب 0100640996601145774099
Email Usالبريد الإلكتروني

[email protected]

[email protected]

By submitting, you will be redirected to WhatsApp to send your inquiry details.

عند الإرسال، سيتم توجيهك إلى الواتساب لإرسال تفاصيل استفسارك مباشرة.